Setting up a dome-shaped tent is relatively simple: Lay the tent flat on the ground and drive in the four corners (some tents are hexagonal). Alternatively, you can stretch the tent poles and then drive in the corners. Connect two sets of tent poles (three sets for hexagonal dome tents). If the tent poles are separate pieces, you will need to assemble them according to the instruction manual. Insert the tent poles into the tent's support sleeves, inserting one end of each set into the sleeve hole. Simultaneously tighten the other ends of both sets of poles, then insert them into the sleeve hole of the other set. Lift the tent, shake it to shape it, and then lay it flat on the ground and drive in the corners. If you have a cover, put it on or use a small rain cover. Done!
Disassembly and Setup: To pack up the tent, first disassemble the outer tent. After removing the tent pegs from the inner tent, don't rush to remove the tent poles. Open the door, lift the tent, shake it to empty the soil inside, and then lay it on the ground. Remove one end of each tent pole to flatten the tent. Push the tent poles out from one end; don't pull them, as they are inserted and pulling will cause them to fall apart. Finally, fold up the tent poles and ground pegs, and put the inner and outer tents back into the bag.
