1. Open the tent body packaging bag and frame packaging bag, take out the product packing list and check the quantity of each component;
2. Take out 8 universal poles and three sets of end frame tees and middle frame crosses with the steel wire ropes already pressed and fixed, arrange them into three A-frames and connect them;
3. Take 4 universal poles and form the frame with the end frame tees and middle frame crosses;
4. Put the entire cotton inner liner on the three sets of A-frames, adjust the position so that the top of the cotton inner liner is aligned with the middle pole of the A-frame;
5. Put the outer tent top on the outside of the cotton inner liner of the three sets of A-frames and adjust the position;
6. Take 6 upright poles and insert them into the end frame tees and middle frame crosses respectively. Use 6 people to simultaneously prop up the tent top, aligning it with the already placed... 7. Connect the ground poles and end members into one piece;
8. Secure the sidewalls and gable walls of the inner liner using Velcro, and adjust their position;
9. Thread the binding straps of each pole onto the inner liner's copper ring and secure them to the poles;
10. Tighten all binding straps, fasten the nylon zippers, and adjust the tent's position, connecting it to the frame members;
11. Secure the sidewalls and gable walls of the inner liner using Velcro;
12. Drive triangular stakes into the ground at the appropriate locations, fix the guy ropes, adjust the tension, and attach the rubber stake heads to the ends of the triangular stakes;
13. Tidy up the tent and cover it with soil around the perimeter.
