How to Choose a Fire Rescue Tent Size: A Buyer’s Checklist

Nov 20, 2026

Leave a message

TL;DR

Pick your fire rescue tent size by the job, not by the number: 20 m² for crew rest, first aid or a small store, 40 m² for briefings, a command post or staging kit. Then compare floor area per container, not tents per container. A 40HQ holds 2,900 m² of floor in 20 m² sets or 2,400 m² in 40 m² sets. Full data for the orange inflatable tent sits on its product page.

Line of orange inflatable fire rescue tents standing in the CWTC workshop

A line of CWTC orange inflatable tents in the workshop.

01 | THE JOB

Start With What the Tent Must Do

Most size mistakes start with the number. Write down what the tent must do, then read the size off the list. A room where people rest is a different job from a workplace where staff stand, talk and spread out maps.

JOB SIZE WHY
Crew rest 20 m² Cots and a walkway fit
First-aid post 20 m² Small footprint beside a vehicle
Shift briefing 40 m² One clear 5 × 8 m floor
Command post 40 m² Room for maps and radios
Equipment staging 40 m² Gear stays under one roof

If one tent must do two jobs, size for the one that needs more floor. You can add a second tent later, but you cannot stretch one that is too small.

Mixed duties are common. One incident ground may need a rest room, a first-aid corner and a briefing space at the same time, which points to a small fleet of two sizes rather than one large tent.

Watch the 20 m² tent go up.

02 | THE SMALLER SIZE

When 20 m² Is the Better Buy

Choose 20 m² when the tent is a room for people, not a workplace. At 4 × 5 m, with a 1.9 m side and a 2.8 m peak, it suits a crew that needs a dry place to rest or a first-aid post parked beside a vehicle. Two small tents also keep roles apart, such as first aid in one and rest in the other.

CHOOSE IT WHENPeople rest, wait or receive first aid
WATCH OUT FORCots and kit fill a 4 × 5 m floor fast

At 103 kg per set, it is also the easier bag to move. Space is often tight beside engines and vehicles, and a 4 × 5 m footprint is simpler to place there.

Watch the 40 m² tent go up.

03 | THE LARGER SIZE

When 40 m² Is the Better Buy

Choose 40 m² when people must work together in one space. The 5 × 8 m floor has a 2.2 m side and a 3.4 m top, and air beams hold the roof, so nothing stands in the middle. That suits a shift briefing, a command post or a staging area.

CHOOSE IT WHENStaff brief, plan or stage kit together
WATCH OUT FORThe 201 kg bag needs a handling plan

Draw the 190 × 75 cm kit cot on your plan before you buy. If the floor looks full on paper, it will be full on site. Also decide who unloads a 201 kg bag before the tent arrives.

FLOOR AREA PER CONTAINER
40HQ20GP
20 m² sets145 sets
 
2,900 m²
40 m² sets60 sets
 
2,400 m²
CONTAINERS FOR YOUR FLOOR AREA
1,0003,0006,00012,000m²
20 m² sets150 sets · 2 × 40HQ
40 m² sets75 sets · 2 × 40HQ

Our calculation from the product-page packing data, in whole containers. A mixed order can share one container.

04 | FREIGHT

Count Floor Area, Not Tents, per Container

Tents per container does not tell you how much floor you ship. Floor area per container does. Using the packing data on the product page, 145 sets of 20 m² fill a 40HQ and give 2,900 m² of floor. The 60 sets of 40 m² that fit the same box give 2,400 m², about 17% less. In a 20GP the gap is small: 1,160 m² against 1,120 m².

Weight points the other way. A 40 m² set weighs 201 kg and a 20 m² set 103 kg, so each square metre of floor weighs about 5.03 kg against 5.15 kg. The larger tent is slightly lighter per square metre but takes more container space.

Before you ask for a freight quote, write down two numbers: the floor area your crews need and the container type. Try both in the chart, then confirm the plan with the loading calculator on the product page.

TENDER DOCUMENT PACK
Fire testClass, standard clause, report no.
ChemicalREACH SVHC report per fabric
ElectricalCE and RoHS for the pump
KitReports for items such as the cot
TermsMOQ, lead time, warranty in writing
 
0 of 5 requested
Select allCopy request
05 | PAPERWORK

Ask Every Bidder for the Same Tender Documents

A tender file is only as strong as its weakest document. Send every supplier the same list and tie each paper to the item it covers. Ask for the original reports, not summaries, so that every report number can be matched to the item it names.

Tick the papers you need, then copy the request into your tender file.

CWTC lists its fire test, two REACH SVHC reports and the pump certificates as PDFs in the test reports section of the orange inflatable tent product page. The remaining fabric reports are available on request. Need a treatment space rather than a support shelter? See the inflatable medical tent.

06 | THE ROUTINE

From Guide to Tender Line in Four Steps

1Write the jobs
2Read off the sizes
3Check the freight
4Send one list
DOList every role the tents must serve, such as rest, first aid and briefing.
YOU END WITHA job list with one line per role.
DOMatch each job to 20 m² or 40 m² and add up the floor area you need.
YOU END WITHA total floor area in square metres.
DOSet that floor area against your container type and run the split through the loading calculator.
YOU END WITHA container count for 40HQ or 20GP.
DOAsk every bidder for the same documents and compare every figure per set.
YOU END WITHOne comparison sheet, ready for the tender file.

Choosing a Fire Rescue Tent: FAQ

+Q1Should I buy one 40 m² tent or two 20 m² tents?

Two 20 m² tents give two separate rooms, for example first aid and crew rest, and each can sit where the ground allows. One 40 m² tent gives a single clear 5 × 8 m floor for briefings or command work. Decide by whether roles must stay apart or share space.

+Q2How do I check that cots and gear will fit?

Draw the 190 × 75 cm kit cot on a 4 × 5 m plan and on a 5 × 8 m plan, then leave a walkway and space for gear. If little free floor is left on the 20 m² plan, move to 40 m². CWTC can also quote a custom size.

+Q3What does a fire test report not tell you?

A report covers only the sample that was tested. Check whether it covers the fabric or the finished tent, which standard clause was used and whether that clause matches your tender. A fabric report says nothing about parts it did not test, such as seams, windows or kit items.

+Q4Can I mix 20 m² and 40 m² tents in one order?

Yes, and many layouts need both, for example several 20 m² rest tents around one 40 m² briefing tent. A mixed order can share one container, so send your split and check the loading calculator on the orange inflatable tent product page. For a real order that mixed sizes and kit, see the Poland emergency shelter project.

+Q5How do I compare two suppliers fairly?

Use one sheet for every bidder: floor size, side and peak height, packed weight per set, bag size, setup crew and time, test report scope and kit contents. Keep every figure per set so freight and handling can be compared line by line.

Send Us Your Jobs and Floor Area

Share what the tents must do, the floor area you need and your container type. Send your size, quantity and use case through the inquiry form, and we will reply with a drawing and quotation.

Send Inquiry
Send Inquiry