Setting up a double-layered triangular tent is relatively complex. The steps are as follows:
(1) Lay the inner tent flat on the ground, smooth it out, and nail ground pegs along the bottom edge.
(2) Raise the two support poles from inside the tent, attach the insulation tubes, and then attach the crossbars.
(3) Cover the tent with the outer tent and remove the rivets to ensure the entire outer tent is taut.
(4) Attach the rain caps to the ends of the support poles and attach the windproof guy lines. The tent is now complete.
There is a space between the inner and outer layers of the double-layered triangular tent. This space should be maintained to prevent the inner and outer layers from sticking together. This space provides rain protection and insulation.
